CONTROLS 6
49
Info
Note the information provided by the luggage manufac-
turer.
6.27 Case holders
F01251-10
Case holders
1
are located on each side of the passenger seat.
A case system (optional) can be attached on the case holders.
Use case systems approved and/or recommended by KTM.
Observe the specifications in the enclosed KTM PowerParts fitting
instructions.
Info
The use of other case systems is not recommended.
Do not exceed the maximum load of the case holders if
using other case systems.
Maximum permissi-
ble load of the case
holders per side if
using other case sys-
tems
7 kg (15 lb.)