SERVICE WORK ON THE CHASSIS 13
205
13.20 Removing front fender
V00754-10
–
Open holder
1
and detach the brake lines and cable.
–
Remove screws
2
.
– Take the fender off to the front.
Info
Pay attention to the brake lines and the cable.
13.21 Installing front fender
V00754-11
– Position the fender.
Info
Pay attention to the routing of the brake lines and the
cable.
–
Mount and tighten screws
1
.
Guideline
Screw, fender M5x12 3.5 Nm
(2.58 lbf ft)