KTM 1290 Super Adventure S User Manual

SERVICE WORK ON THE CHASSIS 13
187
V00744-10
Main work
–
Loosen nut
1
.
–
Loosen nuts
2
.
–
Adjust the chain tension by turning adjusting screws
3
left
and right.
Guideline
Chain tension 40 … 45 mm (1.57 …
1.77 in)
Turn the adjusting screws
3
on the left and right so that
the markings on the left and right chain adjusters
4
are in
the same position relative to the reference marks
A
. The
rear wheel is then correctly aligned.
Info
The top chain section must be taut.
Chain wear is not always even, so you should check the
setting at different chain positions.
–
Tighten nuts
2
.
–
Make sure that chain adjusters
4
are fitted correctly on
adjusting screws
3
.
–
Tighten nut
1
.

KTM 1290 Super Adventure S Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Dry Weight	220 kg
Front Suspension	WP Semi-active Suspension USD Ø 48 mm
Rear Suspension	WP Semi-active Suspension Monoshock
Traction Control	Motorcycle Traction Control (MTC)
Power	160 hp
Torque	138 Nm
Fuel Capacity	23 liters
Front Brakes	2 x Brembo 4-piston radial calipers, 320 mm discs
Rear Brakes	Brembo 2-piston caliper, 267 mm disc
ABS	Bosch 9ME Combined ABS
Wheelbase	1560 mm