KTM 1290 Super Adventure S User Manual

13 SERVICE WORK ON THE CHASSIS
190
V00745-10
– Check the chain sliding guard for wear at the recess.
Info
When the chain sliding guard is new, the rivets
1
are
half visible at the bottom edge
C
of the recess.
» When the rivets of the chain are no longer visible at the
bottom edge of the recess of the chain sliding guard:
– Change the chain sliding guard.
– Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
– Tighten the screws on the chain sliding guard.
Guideline
Screw, chain slid-
ing guard
M5 5 Nm (3.7 lbf ft)
401670-01
– Check the chain guide for wear.
» If the chain guide is worn:
– Change the chain guide.
– Check that the chain guide is firmly seated.
» If the chain guide is loose:
– Tighten the screws on the chain guide.

KTM 1290 Super Adventure S Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Dry Weight	220 kg
Front Suspension	WP Semi-active Suspension USD Ø 48 mm
Rear Suspension	WP Semi-active Suspension Monoshock
Traction Control	Motorcycle Traction Control (MTC)
Power	160 hp
Torque	138 Nm
Fuel Capacity	23 liters
Front Brakes	2 x Brembo 4-piston radial calipers, 320 mm discs
Rear Brakes	Brembo 2-piston caliper, 267 mm disc
ABS	Bosch 9ME Combined ABS
Wheelbase	1560 mm