KTM 1290 Super Adventure S User Manual

14 BRAKE SYSTEM
226
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
– Raise the vehicle with the center stand. ( p. 178)
– Check the rear brake linings. ( p. 227)
V00765-10
Main work
–
Remove screw cap
1
with membrane
2
.
–
Add brake fluid up to MAX marking
A
.
Brake fluid DOT 4 / DOT 5.1 ( p. 322)
–
Mount and tighten screw cap
1
with membrane
2
.
Info
Clean up overflowed or spilled brake fluid immediately
with water.

KTM 1290 Super Adventure S Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Dry Weight	220 kg
Front Suspension	WP Semi-active Suspension USD Ø 48 mm
Rear Suspension	WP Semi-active Suspension Monoshock
Traction Control	Motorcycle Traction Control (MTC)
Power	160 hp
Torque	138 Nm
Fuel Capacity	23 liters
Front Brakes	2 x Brembo 4-piston radial calipers, 320 mm discs
Rear Brakes	Brembo 2-piston caliper, 267 mm disc
ABS	Bosch 9ME Combined ABS
Wheelbase	1560 mm