KTM 1290 Super Adventure S User Manual

WHEELS, TIRES 15
233
V00768-11
– Position brake calipers.
The brake linings are correctly positioned.
–
Mount screws
5
on both brake calipers, but do not tighten
yet.
– Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point. Secure the hand brake lever in the activated position.
The brake calipers straighten.
–
Tighten screws
5
on both brake calipers.
Guideline
Screw, front
brake caliper
M10 45 Nm (33.2 lbf ft)
Loctite
®
243™
– Remove locking piece of the hand brake lever.
V00767-11
–
Position wheel speed sensor
6
in the hole.
–
Mount and tighten screw
7
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
– Remove the vehicle from the center stand. ( p. 179)

KTM 1290 Super Adventure S Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Dry Weight	220 kg
Front Suspension	WP Semi-active Suspension USD Ø 48 mm
Rear Suspension	WP Semi-active Suspension Monoshock
Traction Control	Motorcycle Traction Control (MTC)
Power	160 hp
Torque	138 Nm
Fuel Capacity	23 liters
Front Brakes	2 x Brembo 4-piston radial calipers, 320 mm discs
Rear Brakes	Brembo 2-piston caliper, 267 mm disc
ABS	Bosch 9ME Combined ABS
Wheelbase	1560 mm