KTM 1290 Super Adventure S User Manual

COMBINATION INSTRUMENT 7
91
– Press the SET button again to confirm the Pairing submenu
item.
– The registered trademark of the rider headset appears on the
combination instrument. Press the SET button to select the
device. Press the SET button again to confirm the Confirm sub-
menu item. The pairing of a rider headset with the combina-
tion instrument is now completed at this point.
Info
Once the pairing is completed, the registered trade-
mark of the paired headset is displayed in the Head-
set Rider menu.
Press the UP or DOWN button until the paired device is
marked. The paired device can be deleted by pressing
the SET button.
Not every headset is suitable for pairing with the com-
bination instrument.
– Move the device already paired into the range of the combina-
tion instrument while the Bluetooth
®
function is active.
The device is automatically paired with the combination
instrument.
If the device is not automatically paired with the combina-
tion instrument after approx. 30 seconds:
– Restart the combination instrument or repeat Pair-
ing procedure.

KTM 1290 Super Adventure S Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Dry Weight	220 kg
Front Suspension	WP Semi-active Suspension USD Ø 48 mm
Rear Suspension	WP Semi-active Suspension Monoshock
Traction Control	Motorcycle Traction Control (MTC)
Power	160 hp
Torque	138 Nm
Fuel Capacity	23 liters
Front Brakes	2 x Brembo 4-piston radial calipers, 320 mm discs
Rear Brakes	Brembo 2-piston caliper, 267 mm disc
ABS	Bosch 9ME Combined ABS
Wheelbase	1560 mm