KTM 300 XC-W Six Days TPI 2020 User Manual

WHEELS, TIRES 14
111
H01890-10
(All ERZBERGRODEO)
–
Remove spacer
3
and brake disc guard
4
.
14.2 Installing the front wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
– Always keep the brake discs free of oil and grease.
– Clean the brake discs with brake cleaner when necessary.
H00935-10
(All Standard and Six Days models)
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
– Change front wheel bearing.
–
Clean and grease shaft seal rings
1
and contact sur-
face
A
of the spacers.
Long-life grease ( p. 168)
– Insert the spacers.
– Clean and grease the wheel spindle.
Long-life grease ( p. 168)
– Jack up the front wheel into the fork, position it, and insert
the wheel spindle.
The brake linings are correctly positioned.
S01631-10
(All ERZBERGRODEO)
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
– Change front wheel bearing.
–
Clean and grease shaft seal rings
1
and contact sur-
faces
A
of the spacers.
Long-life grease ( p. 168)
– Insert the spacer and brake disc guard.
– Clean and grease the wheel spindle.
Long-life grease ( p. 168)
– Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.

KTM 300 XC-W Six Days TPI 2020 Specifications

General

Brand	KTM
Model	300 XC-W Six Days TPI 2020
Category	Motorcycle
Language	English