KTM 300 XC-W Six Days TPI 2020 User Manual

SERVICE WORK ON THE CHASSIS 12
79
12.20 Removing the seat
S03480-10
–
Remove screw
1
on the left side.
H02218-10
– Raise the rear of the seat, pull the seat back, and lift it off.
12.21 Mounting the seat
H02218-11
– Mount the front of the seat on the two collar bushings of the
fuel tank, lower the seat at the rear, and push the seat forward.
– Make sure the seat is locked in correctly.
S03480-10
–
Mount and tighten screw
1
on the left side.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)

KTM 300 XC-W Six Days TPI 2020 Specifications

General

Brand	KTM
Model	300 XC-W Six Days TPI 2020
Category	Motorcycle
Language	English