KTM 300 XC-W Six Days TPI 2020 User Manual

7 COMBINATION INSTRUMENT
36
Display Press the but-
ton for 2–3
seconds.
Briefly press
the button .
Press the but-
ton for 2–3
seconds.
Briefly press
the button .
Wait 3 - 5
seconds.
Wait 10 - 12
seconds.
Display mode
SPEED/TR2 (trip
master 2)
Clears the
values TR2
and A2.
Next display
mode
Reduces
value of TR2.
Reduces
value of TR2.
Setting TR2
(trip master 2)
Increases
value of TR2.
Increases
value of TR2.
Reduces
value of TR2.
Reduces
value of TR2.
Stores and
closes the
Setup menu.
Display mode
SPEED/A1 (aver-
age speed 1)
Displays of
TR1, A1 and
S1 are reset
to 0.0.
Next display
mode
No function No function
Display mode
SPEED/A2 (aver-
age speed 2)
No function Next display
mode
No function No function
Display mode
SPEED/S1 (stop
watch 1)
Displays of
TR1, A1 and
S1 are reset
to 0.0.
Next display
mode
No function No function
Display mode
SPEED/S2 (stop
watch 2)
The displays
of S2 and
A2 are set to
0,0.
Next display
mode
No function Starts or
stops S2.
7.24 Table of conditions and menu activation
Display The motorcycle is
stationary.
Menu can be acti-
vated
Display mode SPEED/H (operating hours) •
Setup menu •
Adjusting the unit of measurement •
Setting the clock •
Display mode SPEED/LAP (lap time) •
Viewing the lap time •
Display mode SPEED/TR1 (trip master 1) •
Display mode SPEED/TR2 (trip master 2) •
Setting TR2 (trip master 2) •
Display mode SPEED/A1 (average speed 1) •
Display mode SPEED/A2 (average speed 2) •
Display mode SPEED/S1 (stop watch 1) •
Display mode SPEED/S2 (stop watch 2) •

KTM 300 XC-W Six Days TPI 2020 Specifications

General

Brand	KTM
Model	300 XC-W Six Days TPI 2020
Category	Motorcycle
Language	English