KTM 300 XC-W Six Days TPI 2020 User Manual

SERVICE SCHEDULE 10
51
Every 10 operating hours when used for motorsports
Every 40 operating hours
Every 20 operating hours
After 5 operating hours
After 1 operating hour
Check the antifreeze and coolant level. ( p. 130) ○ ● ● ●
Check the cables for damage and for routing without kinks. ● ● ●
Check that the throttle cables are undamaged, routed without sharp bends, and set cor-
rectly.
○ ● ● ●
Clean the air filter and air filter box. ( p. 82) ● ● ●
Change the glass fiber yarn filling of the main silencer. ( p. 83) ● ●
Service the fork. ●
Perform the shock absorber service. ●
Check the tightness of the easily accessible, safety-relevant screws and nuts. ○ ● ● ●
Change the fuel screen. ( p. 141) ○ ● ● ●
Check the fuel pressure. ● ● ●
Check the headlight setting. ( p. 127) ○ ● ● ●
Check the idle speed. ● ● ●
Final check: Check the vehicle for operating safety and take a test ride. ○ ○ ● ● ●
Read out the error memory after the test ride using the KTM diagnostics tool. ○ ○ ● ● ●
Make a service entry in KTM Dealer.net. ○ ○ ● ● ●
○ One-time interval
● Periodic interval
10.3 Recommended work
Every 40 operating hours when used for motorsports
Every 10 operating hours when used for motorsports
Every 80 operating hours
Every 40 operating hours
After 20 operating hours
After 10 operating hours
every 12 months
Change the front brake fluid. ●
Change the rear brake fluid. ●
Change the hydraulic clutch fluid. ( p. 96) ●
Lubricate the steering head bearing. ( p. 77) ●
Clean the pressure sensor hose. ● ● ●
Service the fork. ○
Perform the shock absorber service. ○
Check the electric starter drive. ● ●
Change the fuel filter. ● ●
Change the piston and check the cylinder. ● ●
Change the oil pump; clean the oil screen. ●
Clean the oil screen in the oil tank. ●
Clean the protection cap of the pressure sensor. ● ● ● ●

KTM 300 XC-W Six Days TPI 2020 Specifications

General

Brand	KTM
Model	300 XC-W Six Days TPI 2020
Category	Motorcycle
Language	English