8 PREPARING FOR USE
42
8.7 Preparing the vehicle for riding on wet and muddy circuits
M01106-01
– Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the KTM PowerParts fitting instructions.
600868-01
– Mount the steel sprocket.
– Clean motorcycle. ( p. 150)
– Straighten the bent radiator fins carefully.
8.8 Preparing vehicle for high temperatures or slow riding
M01129-01
– Check the radiator cap.
Value on the radiator cap 1.8 bar (26 psi)
» If the indicated value does not correspond to the setpoint
value:
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
– Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
– Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
– In the event of scalding, rinse the area
affected immediately with lukewarm water.
– Change the radiator cap.
To Next Page
Loading...
Need help?
General
