EasyManuals Logo

KTM 300 XC-W Six Days TPI 2020 User Manual

KTM 300 XC-W Six Days TPI 2020
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
CONTROLS 6
21
6.18 Closing 2-stroke oil tank cap
E00861-11
Put the 2-stroke oil tank cap on and turn it clockwise.
Fold loop
1
down.
The 2-stroke oil tank cap engages.
6.19 Straps (All ERZBERGRODEO)
S03516-10
The straps are located at the front
1
and rear
2
of the vehicle.
The vehicle can be recovered from difficult terrain using the
straps.
6.20 Cold start button
S03529-10
The cold start button
1
is fitted on the side of the throttle valve
body.
If the engine is cold and the ambient temperature is low, the
electronic fuel injection system extends the injection time. To help
the engine burn the increased fuel quantity, it must be supplied
with additional oxygen by pulling the cold start button.
Info
If the engine is warm, the cold start button must be deacti-
vated.
Possible states
The cold start button is activated The cold start button is
pulled out all the way and turned by a ¼ turn.
The cold start button is deactivated A further ¼ turn returns
the cold start button back to the basic position.

Table of Contents

Other manuals for KTM 300 XC-W Six Days TPI 2020

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 300 XC-W Six Days TPI 2020 and is the answer not in the manual?

KTM 300 XC-W Six Days TPI 2020 Specifications

General IconGeneral
BrandKTM
Model300 XC-W Six Days TPI 2020
CategoryMotorcycle
LanguageEnglish

Related product manuals