RIDING INSTRUCTIONS 8
33
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
– Park the vehicle on a firm and level surface.
– Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
Note
Fire hazard Hot vehicle components pose a fire hazard and explosion risk.
– Do not park the vehicle near to materials which are highly flammable or explosive.
– Allow the vehicle to cool down before covering it.
– Apply the brakes on the motorcycle.
– Shift the transmission to neutral position.
– Press and hold the stop button while the engine is idling until the engine stops.
– Park the motorcycle on firm ground.
8.12 Transporting
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
Note
Fire hazard Hot vehicle components pose a fire hazard and explosion risk.
– Do not park the vehicle near to materials which are highly flammable or explosive.
– Allow the vehicle to cool down before covering it.
H02628-01
(all SX‑F models)
– Switch off the engine.
– Mount plug-in stand on the fork legs.
Plug-in stand (A46029094000)
Info
The plug-in stand is included.
Make sure the brake line runs in front of the plug-in
stand and does not become wedged.
401475-01
– Use tension belts or other suitable devices to secure the
motorcycle against falling over or rolling away.
Info
Only tighten the tension belts to the point that the
plug-in stand is firmly in contact with the fender
and the tires.
Pay attention to the alignment of the plug-in stand
to the fender.
(XC‑F US)
– Switch off the engine.
– Use tension belts or other suitable devices to secure the
motorcycle against falling over or rolling away.
To Next Page
Loading...
Need help?
General
