KTM 450 SX-F 2023 User Manual

SERVICE WORK ON THE CHASSIS 11
71
11.22 Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
– Allow the voltage regulator to cool down before performing any work.
S05350-10
–
Remove screw
1
.
S05390-01
– Raise seat, pull it toward the fuel tank and lift it off.
11.23 Mounting the seat
S05391-10
– Attach the seat to the collar bushings at the front and simulta-
neously push it back.
The holding lugs engage in the recesses at the back.
– Make sure the seat is latched in place correctly.

KTM 450 SX-F 2023 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	449.9 cc
Bore x Stroke	95 mm x 63.4 mm
Starter	Electric starter
Compression Ratio	13.1:1
Transmission	5-speed
Final Drive	Chain
Cooling	Liquid-cooled
Frame	Central Double-Cradle Type 25CrMo4 Steel
Front Suspension	WP XACT-USD, Ø 48 mm
Rear Suspension	WP XACT Monoshock with linkage
Ground Clearance	370 mm
Fuel System	Keihin EFI, 44 mm
Front Brake	260 mm disc
Rear Brake	220 mm disc
Fuel Tank Capacity	7.2 L