KTM 65 SX 2009 User Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 29
300666-11
– Position the upper triple clamp with the steering.
– Mount and tighten screw .
Guideline
Nut, steering stem M20x1.5 10 Nm (7.4 lbf ft)
– Position fuel tank breather .
– Install the front fender. ( p. 29)
– Install the start number plate. ( p. 30)
–
Install the fork legs. x ( p. 26)
300668-10
– Mount and tighten screw .
Guideline
Screw, top triple clamp M8 25 Nm
(18.4 lbf ft)
– Check that the cable harness, throttle cables, brake and clutch line can move freely
and are routed correctly.
– Check play of steering head bearing. ( p. 25)
9.25Greasing the steering head bearing x
300669-01
–
Remove the lower triple clamp. x ( p. 28)
–
Install the lower triple clamp. x ( p. 28)
9.26Dismounting the front fender
700414-10
– Remove screws . Remove the front fender.
9.27Installing the front fender
700415-01
– Position the fender with holding lugs  into the drill holes on the start number
plate.

KTM 65 SX 2009 Specifications

General

Brand	KTM
Model	65 SX 2009
Category	Motorcycle
Language	English