KTM 65 SX 2009 User Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 35
9.43Adjusting basic position of clutch lever
700393-11
– Adjust the basic setting of the clutch lever to the size of your child's hand by turn-
ing the adjusting screw .
Info
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between
the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
9.44Checking the fluid level of hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
700419-01
– Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
– Remove screws .
– Remove cover  with diaphragm .
– Check the fluid level.
Fluid level under top level of container 4 mm (0.16 in)
» If the level of the fluid does not meet specifications:
– Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) ( p. 68)
– Position the cover with the diaphragm. Mount and tighten the screws.
9.45Changing the hydraulic clutch fluid x
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
The fluid level rises with increasing wear of the clutch lining disc.
300669-10
– Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
– Remove screws .
– Remove cover  with diaphragm .
300670-10
– Fill bleeding syringe  with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Hydraulic fluid (15) ( p. 68)
– On the slave cylinder, remove the bleeder screw and mount bleeding syringe .

KTM 65 SX 2009 Specifications

General

Brand	KTM
Model	65 SX 2009
Category	Motorcycle
Language	English