KTM 690 Duke 2017 User Manual

13 BRAKE SYSTEM 100
13.2 Adjusting the basic position of the hand brake lever
K00356-10
(Duke)
– Adjust the basic position of the hand brake lever to your hand size by turning
adjusting wheel
1
.
Info
Push the hand brake lever forward and turn the adjusting wheel.
Do not make any adjustments while riding.
V00554-11
(Duke R)
– Adjust the basic position of the hand brake lever to your hand size by turning
adjusting wheel
1
.
Info
Push the hand brake lever forward and turn the adjusting wheel.
Do not make any adjustments while riding.
13.3 Checking the brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
– Make sure that worn-out brake discs are replaced immediately. (Your authorized KTM workshop will be glad to help.)

KTM 690 Duke 2017 Specifications

General

Displacement	690 cc
Compression Ratio	12.7:1
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
Transmission	6-speed
Starter	Electric starter
Lubrication	Forced oil lubrication with 2 oil pumps
Front Suspension	WP upside-down Ø 43 mm
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Seat Height	835 mm
Ground Clearance	192 mm
Wheelbase	1, 466 mm
Fuel Capacity	14 liters
Dry Weight	148.5 kg
Engine Type	Single-cylinder, 4-stroke
Torque	74 Nm @ 6, 500 rpm
Frame	Chromium-Molybdenum steel trellis frame
Rear Suspension	WP monoshock
Front Brake	Brembo four-piston radial fixed caliper, 320 mm disc
Rear Brake	Single 240 mm disc, Brembo single-piston caliper
ABS	Bosch 9M+ two-channel ABS (disengageable)