18 SERVICE WORK ON THE ENGINE 167
H01066-10
–
Mount and tighten oil filler plug
1
with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
– Always make sure there is sufficient ventilation when running the engine.
– Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
– Start the engine and check that it is oil-tight.
Finishing work
– Check the engine oil level. ( p. 162)
18.3 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
H01066-10
Main work
–
Remove filler plug
1
and the O-ring from the clutch cover, and fill up with engine oil.
Engine oil (SAE 10W/60) (00062010035) ( p. 195)
Engine oil (SAE 10W/50) ( p. 195)
Info
In order to achieve optimal engine performance, it is not advisable to mix differ-
ent engine oils.
We recommended changing the engine oil when necessary.
To Next Page
Loading...
Need help?
General
