6 CONTROLS 31
V00556-10
–
Lift cover
1
of the filler cap and insert the ignition key in the lock.
Note
Danger of damage Ignition key breakage.
– To take pressure off of the ignition key, push down on the filler cap. Damaged igni-
tion keys must be replaced.
– Turn the ignition key 90° clockwise.
– Open the filler cap.
6.7 Closing the filler cap
V00557-01
– Fold down the filler cap.
– Turn the ignition key 90° clockwise.
– Push down the filler cap and turn the ignition key counterclockwise until the lock
closes.
Warning
Fire hazard Fuel is highly flammable, poisonous and harmful to your health.
– After closing the filler cap, ensure that it is locked properly. Change cloth-
ing that has been contaminated with fuel. Immediately clean contaminated
areas on the skin with soap and water.
– Remove the ignition key and close the cover.
To Next Page
Loading...
Need help?
General
