Kubota DMC 8028 - Bearings on Rollers; Universal Joint

Maintenance
110
Cutting unit
 Locate the grease nipples on both sides of the machine.
 Press the nozzle of the grease gun over the grease nipples.
 Pump the grease gun once (1 x) or twice (2 x) (max.).
→ »Maintenance intervals« Page 104
→ »Lubricants« Page 216
 Turn the cutting disc until both grease nipples are visible
 Press the nozzle of the grease gun over the grease nipples.
 Pump the grease gun once (1 x) or twice (2 x) (max.).
→ »Maintenance intervals« Page 104
→ »Lubricants« Page 216
58.237.000
58.237.000