Maintenance
114
Service - check
Cutterbar
\ WARNING
Safety concerning maintenance work on the cutterbar
When working on the cutterbar, the tractor must be stopped and
secured.
This prevents the machine from suddenly starting to rotate.
Failure to follow the safety instructions may result in serious
injuries.
When working on the cutterbar:
• The P.T.O. is disengaged.
• Lower the implement to the ground.
• The hydraulic controls is in neutral.
• The tractor engine must be stopped.
• The ignition key is removed.
• The parking brake is set.
• Secure the tractor to prevent it from rolling.
Failure to secure the tractor to prevent it from rolling could
endanger lives.
Be careful when using oil
Use barrier cream or protective gloves when handling oil.
It will protect your hands against skin injuries.
Direct contact with the oil could lead to serious skin injuries.
Use the correct oil type
Always use the correct oil type for the transmission.
This will ensure the transmission has a long service life.
Using the incorrect oil type may damage the transmission.
Maintain correct oil level
The maximum and minimum oil level indicators on the
transmission must not be exceeded.
Correct transmission oil level will ensure a long service life.
Incorrect oil levels can cause the transmission to overheat,
resulting in serious damage.
To Next Page
Loading...
Need help?
General
