Assembly - attachment
50
Lighting
equipment
Connect the
electrical
Connect the accompanying cable to the tractor.
Lighting equipment
Connect the plug for the 12 V power supply to the 7-pole plug
socket on the tractor.
Lighting equipment -
USA
The machine is equipped with a light for road transportation. The
lighting equipment is installed on the rear of the machine and is
connected to the tractor using a 7-pole plug. The corresponding
connection must be on the tractor (SAE J560).
If the tractor does not have the corresponding connection, this must
be subsequently installed. Contact your dealer.
This lighting is controlled by the tractor. The lights are only lit if the
tractor's parking lights are lit or the tractor's headlights are lit.
Check the electric cable.
The insulation of the electric leads must not be unduly worn, and
the cables must not be hanging loose.
Electric cables with cable insulation that is missing or worn
through must be replaced.
Otherwise, this will damage the machine.
To Next Page
Loading...
Need help?
General
