Cleaning
96
Cleaning
Before cleaning
\ WARNING
Higher risk when cleaning the equipment
When cleaning, there is an increased risk of injury.
Attention when carrying out cleaning work protects your own and
others safety.
Failure to follow the safety instructions may result in serious
injuries.
Therefore, do the following before cleaning:
Disengage the P.T.O. on the tractor.
Lower the implement to the ground.
Place the hydraulic controls in neutral.
Stop the tractor.
Remove the ignition key.
Set the parking brake.
Secure the tractor to prevent it from rolling.
Failure to secure the tractor to prevent it from rolling could
endanger lives.
Disconnect the power when cleaning the machine
Always disconnect the power before you start cleaning the
machine.
This will prevent short circuits and damage to the electric circuit.
There is a risk of burns and other serious injuries if the electrical
systems short circuit.
Protect your body and face when cleaning the machine
Wear the correct protective gear for body and face when cleaning
the machine.
This will protect your body and face from dirt and oil splashes.
Insufficient protection of body and face can lead to severe skin
and eye injuries.
Before starting to clean the machine do the following:
• Open the guard around the cutting unit.
• Remove all loose material from the machine.
To Next Page
Loading...
Need help?
General
