Disposal
213
Disposal
When the machine reaches the end of its service life, it must be
disposed of in the correct way. Observe the following:
Metal parts
Take usable parts to an authorized recycling plant. Larger scrap parts
must be taken to an authorized wrecker where they can be processed
in accordance with applicable regulations.
Rubber parts
Take usable parts to an authorized recycling plant where they can be
processed in accordance with applicable regulations.
Plastic
Take usable parts to an authorized recycling plant where they can be
processed in accordance with applicable regulations.
Hydraulic oil and
lubricants
The machine shall be emptied of oil and lubricants.
Used oil must be taken to a wrecker where it can be processed in
accordance with applicable regulations.
Electronic parts
Take usable parts to an authorized recycling plant where they can be
processed in accordance with applicable regulations.
To Next Page
Loading...
Need help?
General
