Maintenance
199
Friction clutch
As required
→ »Maintenance intervals« Page 104
80xx model
The friction discs on the friction clutch are changed as follows:
Open the protection and dismantle the lock on the friction clutch.
Pull the P.T.O. shaft back, free of the drawbar.
\ WARNING
Safety concerning maintenance work on the transmission
When working on the transmission the tractor must be stopped
and secured.
This prevents the machine from suddenly starting to rotate.
Failure to follow the safety instructions may result in serious
injuries.
When working on the transmission:
• The P.T.O. is disengaged.
• Lower the implement to the ground.
• The hydraulic controls is in neutral.
• The tractor engine must be stopped.
• The ignition key is removed.
• The parking brake is set.
• Secure the tractor to prevent it from rolling.
Failure to secure the tractor to prevent it from rolling could
endanger lives.
To Next Page
Loading...
Need help?
General
