Preparation
34
Preparation
Preparing the
machine
The machine is divided into its main components for transport to the
user. The machine must be assembled in accordance with the specific
assembly instructions delivered with each machine.
If any parts are missing or were damaged during transport, kindly
contact the distributor, importer or manufacturer without delay.
Instruction manual
The instruction manual is a part of the machine and must always be
kept on or at the machine.
\ CAUTION
Do not attempt to assemble the machine alone
Personnel must be trained before assembling the machine. Do not
carry out assembly work alone. The following must be observed to
ensure that the machine is in good working order:
• Adhere to the sequence of the work steps.
• Adhere to the tolerances and tightening torques of bolts,
screws and component parts of the machine.
• Knowledge of occupational safety when assembling the
machine.
Incorrect assembly can cause accidents or damage to the
machine.
Parts checklist Number
P.T.O. shaft 1
Instruction manual 1
Spare parts list 1
Additional parts See packing list
To Next Page
Loading...
Need help?
General
