20 OPERATING THE MACHINE
• Cruise Control Device
The Cruise Control Device
is
designed for machine
operating efficiency and operator's comfort. This device
will provide a constant forward operating speed by
mechanically holding the speed control pedal at a
selected position.
• To engage Cruise Control Device
1.
Accelerate speed to desired level using Speed Control
Pedal.
2.
Pull the cruise control knob.
3.
Release Speed Control Pedal.
4.
Release the cruise control knob and desired speed will
be maintained.
• To disengage Speed Set Device
• Step
on
the forward acceleration side of the pedal or
depress the brake
pedal.
NOTE:
• Cruise control device will not operate
in
reverse.
IMPORTANT:
• To prevent the damage of cruise control device, do not
depress the reverse
pedal when the cruise control
device
is
engaged.
(1)
Speed control pedal
(A)
"FORWARD"
(8) "REVERSE"
1 BDAHADAP097 A
(1)
Cruise control knob
STOPPING
.Stopping
1.
Slow down the engine.
2.
Step
on
the brake pedal.
3.
After the machine has stopped, disengage the PTO,
lower
the implement to the ground and set the parking
brake.
CHECK
DURING
DRIVING
• Immediately Stop the Engine
if:
• The engine suddenly slows down or accelerates.
• Unusual
noises are suddenly heard.
• Exhaust fumes suddenly become discolored.
While driving, make the following checks to see that all the
parts are functioning
normally.
[GR2000]
[GR21 00]
1 BDAHADAP013A
(1)
Easy checker(TM)
To Next Page
Loading...
Need help?
General
