Kubota GR2100 User Manual

30 TIRE AND WHEELS
TIRE AND WHEELS
TIRES
A WARNING
To avoid personal injury:
• Do not attempt to mount a tire. This should be
done by a qualified person with the proper
equipment.
• Always maintain the correct tire pressure.
Do
not inflate tires above the recommended
pressure
shown in the Operator's Manual.
• Inflation
pressure in front tires rises quickly
when using compressed air.
A CAUTION
Never operate machine with a loose rim, wheel, or
axle.
•
Whenever bolts are loosened, retighten to
specified torque.
• Check all bolts frequently and keep them
tightened.
.Inflation Pressure
Though the inflation pressure is factory-set to the
prescribed
level, it naturally drops slowly in the course of
time. Thus, check it everyday and inflate as necessary.
Tire sizes
Front
16 x 6.50 -
8,
4PR
Rear
23 x 10.50 -
12,
4PR
1 BDABARAPOO2A
(1) Ground
Recommended Inflation
Max. Pressure
200 kPa
(2.0
kgf/cm', 29 psi)
140 kPa
(1.4 kgf/cm', 20 psi)
(A) "INSUFFICIENT"
(8) "NORMAL"
(C)
"EXCESSIVE"

Kubota GR2100 Specifications

General

Horsepower	21 HP
Transmission	Hydrostatic
Cutting Width	48 inches
Drive	2WD
Engine Type	Diesel
Turning Radius	Zero turn