44 PERIODIC SERVICE
.Greasing
A CAUTION
To avoid personal
injury:
• Be
sure
to
stop
the engine and remove the key
before greasing.
Grease the
following locations.
1
BDAHADAP083B
(1)
Spindle shaft
(2)
Belt tension pulley
(3)
Belt tension pivot
1
BDABARAP01
OF
(1)
Mower universal joint (Apply grease on the spline shaft.)
EVERY
25
HOURS
.Safety
Devices
[GR2000]
The Safety Devices
in
your machine are designed to
protect you while operating. Please check these Safety
Devices
periodically - daily
is
best - to test function of the
Safety Devices before operation.
A CAUTION
To avoid personal
injury:
• Do
not
allow
anyone
near the machine
while
testing
.
•
If
the
machine
does
not
pass one
of
the
following
tests,
do
not
operate the machine.
See
your
local KUBOTA Dealer.
IMPORTANT:
•
Check the following tests before operating the
machine .
• Checking Safety Devices
[GR2000]
1.
Check the following tests before operating the mower.
Sit
on
the operator's seat for all tests.
2.
If the machine does not pass one of the following tests,
do not operate the machine.
Contact your
KUBOTA Dealer.
• Safety
Start
Control
1
1.
Depress the brake pedal fully.
2.
Engage the PTO lever.
3.
Turn the key switch to the "START" position.
4.
The engine should not crank.
• Safety
Start
Control
2
1.
Disengage the PTO lever.
2.
Release the brake pedal.
3.
Turn the key to the "START" position.
4.
The engine should not crank.
• Seat Safety
Control
1
1.
Run
the engine at half throttle.
2.
Engage the PTO lever.
3.
Stand
up.
(DO NOT GET OFF THE MACHINE.)
4.
Engine should shut off.
• Seat Safety
Control
2
1.
Run the engine at half throttle.
2.
Disengage the PTO lever.
3.
Release the brake pedal.
4.
Stand
up.
(DO NOT GET OFF THE MACHINE.)
5.
Engine should shut off.
• KUBOTA Reverse Awareness
system
(KRA system) 1
1.
Start and
run
the engine at half throttle.
To Next Page
Loading...
Need help?
General
