.Checking
Coolant Level
[GR21 00]
A
CAUTION
To avoid personal
injury:
• Do
not
remove the
radiator
cap when the
engine
is
hot. Loosen cap
slightly,
to
the stop,
to
relieve
any
excess pressure before removing
cap
completely.
Check the coolant level daily both the radiator and the
recovery tank before starting engine.
1.
Remove the radiator cap
and
check
to
see that the
coolant
level is just below the fill port.
2.
Check to see that the coolant level
is
between the
"FULL" and
"LOW" marks of recovery tank.
3.
When the coolant level drops due to evaporation,
add
water only
up
to just below the fill port of the radiator
and
the full level of the recovery tank.
In
case of leakage,
add
anti-freeze
and
water
in
the
specified mixing ratio
up
to
the full level.
(See
"Flush Cooling System and Changing Coolant"
in
"EVERY 1 YEAR"
in
"PERIODIC SERVICE" section.)
(1)
Radiator cap
(2)
Over flow pipe
(1) Recovery tank cap
(2)
Recovery tank
IMPORTANT:
PERIODIC SERVICE 43
(A) "FULL"
(8) "LOW"
• If the radiator cap has to
be
removed, follow the
caution above
and
securely retighten the
cap.
• Use clean, distilled water
and
anti-freeze to fill the
radiator
and
the recovery tank.
• If water should leak, consult your local KUBOTA
Dealer.