1SPECIFICATIONS
SPECIFICATIONS
SPECIFICATION TABLE [HST Type]
[ROPS and CAB models]
Model
L3240 L3540 L4240 L5240 L5740
4WD
Engine
Model
D1703-M-E2-
HST
D1803-M-E2-
HST
V2203-M-E2-
HST
V2403-M-TE2-
HST
Type Indirect injection vertical, water-cooled, 4-cycle diesel
Number of cylinders 3 4
Total displacement L 1.647 1.826 2.197 2.434
Bore and stroke mm 87 x 92.4 87 x 102.4 87 x 92.4 87 x 102.4
Net power* kW (PS) 23.9 (32.5) 26.1 (35.5) 31.3 (42.6) 38.8 (52.8) 42.5 (57.8)
PTO power*
(factory observed)
kW (PS)/
rpm
18.7 (25.4)/
2700
20.9 (28.4)/
2700
26.1 (35.5)/
2700
33.6 (45.7)/
2600
37.3 (50.7)/
2700
Maximum torque
N-m
(kgf-m)
101.7 (10.4) 112.8 (11.5) 139.7 (14.2) 180.6 (18.4)
Battery capacity
12V, RC:
123min,
CCA: 490A
12V, RC: 133 min, CCA: 582A
Fuel Diesel fuel No.1 [below -10 ] Diesel fuel No.2 [above -10 ]
Capacities
Fuel tank L 44 50 54
Engine crankcase
(with filter)
L 5.7 6.7 8.2 9.4
Engine coolant L 6.0 7.5 8.2
Transmission case L 42 43 45
Dimensions
Overall length
(without 3p)
mm 3120 3285 3410
Overall width
(min. tread)
mm 1520 1665 1570
Overall
height
with
ROPS
mm 2385 2405 2490
with
CAB
mm --- 2295 2405
Wheel base mm 1805 1895 1915
Min. ground clearance mm 350 375 400
Tread
Front mm 1150 1145 1340
Rear mm 1200, 1300, 1385, 1480
1285, 1435,
1530
1225, 1325, 1425, 1525
Weight
with
ROPS
kg 1540 1665 1745
with
CAB
kg --- 1815 1920
To Next Page
Loading...
Need help?
General
