Kubota L3540 User Manual

OPERATING THE TRACTOR38
BRange Gear Shift Lever (L-M-H)
The range gear shift can only be shifted when the tractor
is completely stopped and the speed control pedal is in
the neutral position.
IMPORTANT:
To avoid transmission and shift linkage damage when
shifting:
A Completely stop the tractor using the brake pedals.
A Do not force the range gear shift lever.
A If it is difficult to shift the lever into L, M, or H from
neutral position:
On slopes be sure to set the parking brake before
starting the procedure.
(1) Slightly depress the speed control pedal to rotate
the gears inside of the transmission.
(2) Release the speed control pedal to the neutral
position.
(3) Depress the clutch pedal, wait for a moment and
then shift the lever.
A The range gear shift number being selected appears
on the display.
(1) Range gear shift lever (L-M-H) (H) "HIGH"
(M) "MIDDLE"
(L) "LOW"
(N) "NEUTRAL POSITION"
(1) Gear shift number (H-M-L) N: "NEUTRAL"

Kubota L3540 Specifications

General

Drive	4WD
Displacement	111.4 cu in (1.8 L)
Hydraulic System Type	Open center
3-Point Hitch Category	Category I
Tire Size (Rear)	12.4-24
Engine Type	Diesel
PTO Power	29.5 hp
Transmission	Hydrostatic
Number of Gears	3-range
Weight	2601 lbs (1180 kg)
Height	91.7 in (232 cm)
Tire Size (Front)	7-16