57PTO
PTO
PTO OPERATION
To avoid personal injury:
A Disengage PTO, stop engine, and allow all
rotating components to come to a complete
stop before connecting, disconnecting,
adjusting, or cleaning any PTO driven
equipment.
BPTO Clutch Control Lever
1. The tractor has a 540 rpm speed position.
2. The PTO clutch control lever engages or disengages
the PTO clutch which gives the PTO independent
control.
Shift the lever to "ON" to engage the PTO clutch. Shift
the lever to "OFF" to disengage the PTO clutch.
A To avoid shock loads to the PTO, reduce engine
speed when engaging the PTO, then open the throttle
to the recommended speed.
A To avoid damage of PTO clutch and implement, shift
the PTO clutch control lever slowly, when engaging
the PTO clutch. Do not keep the PTO clutch control
lever half way.
Proper warm up is strongly recommended in cold
weather.
Do not continuously shift the PTO clutch control lever.
A Tractor engine will not start if the PTO clutch control
lever is in the engaged "ON" position.
A When the clutch pedal is depressed, the PTO
disengages. [HST Type]
A When the clutch pedal is depressed, the PTO
engages. [GST, Manual Transmission Type]
(1) PTO clutch control lever "ON" "OFF"
Model
Engine
Speed rpm
Shaft
PTO
Speed
rpm
GST Type
Manual Transmission Type
2550
6-Spline 540
HST Type
L3240
L3540
2685
L3940
L4240
L4740
2640
L5240
L5740
2590
To Next Page
Loading...
Need help?
General
