Kubota R430 User Manual

2. Approach the machine slowly
a. Press
the inching-and-brake-pedal slightly while
pressing the accelerator pedal.
The machine approaches slowly.
(A) Press the inching and brake
pedal slightly
The machine can slowly approach an object by
accelerator
pedal regulation only, without inching-
and-brake-pedal operation.
3. To scoop in case of the bucket does not raise up
during digging, press the inching-and-brake-pedal.
Traction force is reduced and lifting force is
increased, if the inching-and-brake-pedal is
pressed.
(A) Press the inching and brake
pedal fully
(B) Release the inching and
brake pedal
2. Using the inching and brake pedal
according to the job
WARNING
To avoid personal injury or death:
• When traveling with a fully-loaded bucket, do
not press the inching-and-brake-pedal all the
way. The machine will brake abruptly and cause
dangerous loss of balance that may cause an
accident.
(1) Inching and brake pedal (2) Brake pedal
Loading
1. Press
the inching-and-brake-pedal slightly while
pressing the accelerator pedal to approach an
object slowly.
You can also perform slow approach by regulating
accelerator-pedal-operation.
2. Operate the bucket.
You can operate the bucket at the maximum engine
rpm when the inching-and-brake-pedal is used to
approach slowly. Bucket-operation-speed is thus
maintained.
3. Press the inching-and-brake-pedal slightly to allow
the machine to approach to the desired stop
position.
4. Then press the inching-and-brake-pedal all the way
to stop the machine completely.
HOW TO USE THE INCHING AND BRAKE PEDAL OPERATION OF THE MACHINE
R430
53

Kubota R430 Specifications

General

Brand	Kubota
Model	R430
Category	Utility Vehicle
Language	English