Delivery and assembly
39
Deliver y and assembly
Checking the
scope of delivery
Delivery is in the fully assembled state
The machine is delivered fully assembled. Using the check list, check
the loose parts on delivery. If any parts of the machine have not been
fitted or are missing, please contact your dealer.
If parts are missing or have been damaged during transportation,
please inform the dealer, importer or manufacturer immediately.
Operator’s manual
The operator’s manual belongs with the machine and must always be
kept on board. A document box for the operator’s manual and spare
part manual is mounted on the main frame.
\ WARNING
Do not assemble the machine yourself
Trained personnel are required to assemble the machine. Do not
perform assembly work yourself. The following points are required
to be met for the machine to be in proper condition:
• Observance of the sequence of work steps.
• Compliance with tolerances and torques.
• Knowledge of work safety during assembly.
Incorrect assembly can result in damage to the machine or
accidents.
Check list for parts which were
supplied loose
Quantity
PTO shaft for drive 1
PTO shaft for auxiliary drive 2
Tine support placing swaths on the left 11
Tine support placing swaths on the right 11
Swath former 1
Operator’s manual 1
Spare part manual 1
Additional equipment See delivery note
The operator’s manual and spare
part manual can be found in the
document box on the machine.
To Next Page
Loading...
Need help?
General
