31
Working Light Switch
If the key in “RUN” position, the lights can be
switched on by pressing the switch.
(1) Working light switch
Night operation
3
CAUTION
To avoid personal injury:
Visibility is reduced in darkness,
so that the working light
alone is not enough. Prepare
additional lighting, observe
safety rules as well as special
regulations for night work.
Travel Buzzer (OPTION)
When you handle the drive levers, the buzzer
sounds at the same time or before the
excavator starts to run.
TWO PATTERN SELECTION
SYSTEM (TPSS)
3
CAUTION
To avoid personal injury:
Study control lever pattern A
and pattern B.
Then choose the one which is
most familiar
Position the pattern selector
lever in either the left side
position of the machine (pattern
A) or the right side position
(pattern B).
Familiarize yourself with the
pattern selected by operating
slowly.
Pattern Change
Position the pattern selector lever to the
desired position.
(1) Pattern selector lever (A) Pattern A
(Two Pattern Selection (B) Pattern B
System: TPSS)
To Next Page
Loading...
Need help?
General
