Get Started 5
Set Up Your Phone
You need to charge the battery to begin setting up your phone.
Charge the Battery
Fully charge the battery before powering on the phone.
NOTE:
The battery cannot be removed from the phone. For replacing or disposing of the
battery, contact a KYOCERA authorized service center.
IMPORTANT:
Unplug the AC adapter from the electrical outlet when not in use to reduce the
environmental impact of charging.
IMPORTANT:
Use only a USB Type-C charger/cable for this phone.
1. Open the cover to the USB/Charger port on the bottom of the phone.
2. Plug one end of the USB cable into the phone’s USB/Charger port.
3. Plug the other end of the USB cable into the AC adapter, and then plug the adapter into
an electrical outlet. Be sure to use the AC adapter that came with your phone.
WARNING: Use only approved chargers and cables with your phone. Improper
handling of the charging port, as well as the use of an incompatible charger
or cable, may cause damage to your device and void the warranty.
USB Type-C port
To Next Page
Loading...
Need help?
General
