Kyocera DuraPro User Manual

Calendar & Tools 55
2. Slide the card holder in the direction of the arrow to unlock it ( ).
3. Raise the card holder with your finger ( ).
4. Insert a microSD card into the holder. Make sure to check the position of the gold
terminals ( ).
5. Gently press the card and the card holder ( ), and then slide the holder in the
direction of the arrow to lock it ( ).
6. Place the battery back into its compartment and replace the battery cover. See Install
the Battery.
Remove the microSD Card
1. Remove the battery cover and the battery. (The battery must be removed in order to
remove the microSD card.) See Remove the Battery.
2. Slide the SD card holder in the direction of the arrow to unlock it ( ).
3. Raise the card and the card holder with your fingers ( ).
4. Gently pull out the card from the holder ( ).

Kyocera DuraPro Specifications

General

Brand	Kyocera
Model	DuraPro
Category	Cell Phone
Language	English