EasyManua.ls Logo

Kyocera DuraPro - Self-timer; Multiple Shots; Zoom

Kyocera DuraPro
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Camera 69
Key Guidance to show keypad shortcuts in camera mode.
User Settings to provide convenient access to your favorite settings.
Self-timer
1.
From camera mode, press OPTIONS (right softkey) > Self-Timer.
2.
Highlight a delay time (5 Seconds or 10 Seconds) and press .
3.
Press or START (left softkey) when you are ready to start the timer. (A countdown
is displayed in the middle of the screen and your phone will beep during the
countdown.)
4.
Get ready for the picture. (When the timer is down to three seconds, the tone of the
beep will change.)
To cancel the self-timer after it has started:
Press CANCEL (right softkey) or .
Multiple Shots
This feature allows you to take three, six, or nine shots in a continuous sequence. When you
take multiple shots, the icon will be displayed on the upper left corner of the screen.
1.
From camera mode, press OPTIONS (right softkey) > Fun Tools > Multiple Shots.
Note: When taking multiple shots, the resolution is temporarily set to 0.1M (240x320).
2.
Highlight an option and press .
3.
Highlight the duration of the interval between shots (Normal or Fast) and press .
4.
Press , , or CAPTURE (left softkey) to take the pictures. (The screen will
display up to nine thumbnail pictures.)
Zoom
This feature allows you to zoom in on an object when you take a picture. You can adjust the
zoom from 1x to 12x.
1.
From camera mode, press the navigation key right to zoom in or left to zoom out.
or
From camera mode, press the volume button up to zoom in or down to zoom out.
2.
Press , , or CAPTURE (left softkey) to take a picture.

Table of Contents

Related product manuals