Configuration
1-102
Printer Resetting
The procedure described below resets the printer’s temporary conditions,
such as the current unit of measurement, page orientation, font, character
code set, margins, etc., set by commands to their default values.
1
Press the MENU key.
2
Press the or key repeatedly until Others > appears.
3
Press the > key.
4
Press the or key repeatedly until >Printer Reset appears.
5
Press the ENTER key. A question mark (?) appears.
6
Press the ENTER key again. Self test appears while the printer is
resetting itself, then Please wait followed by Ready.
Others >
>Printer Reset
>Printer Reset ?
Self test
Please wait
Ready
To Next Page
Loading...
Need help?
General