Printing Test Pages
1-23
Received Data Dumping
It is possible to print data received by the printer as hexadecimal code for
the purposes of debugging programs and files.
1
Press the MENU key.
2
Press the or key repeatedly until Others > appears.
3
Press the > key.
4
Press the or key repeatedly until > Print HEX-DUMP appears.
5
Press the ENTER key. A question mark (?) appears.
6
Press the ENTER key again. Processing appears for a second, and
then Waiting appears.
7
Send data to be dumped to the printer. The message Processing
will be displayed during receiving the data.
Once the dumped data you require has been output, it is possible to
cancel the printing of any further dumped data by taking the printer
offline by pressing the GO key and then pressing the CANCEL key.
8
Once all data has been received, the message Waiting will appear.
Press the GO key to finish printing.
Others >
>Print HEX-DUMP
>Print HEX-DUMP?
Processing
Waiting
To Next Page
Loading...
Need help?
General