Installing Option Units
A-25
PT-4/PT-60 Rear Tray
Use the rear tray when you wish paper to be stacked with the printed side
facing up (reverse order), or when you are printing on envelopes, postcards,
transparencies, or thick paper. When installing it directly to the printer,
use PT-4. If an option duplexer has been installed, use PT-60.
1
Install the paper stopper according to the size of paper to be used.
(same for both PT-4 and PT-60)
2
Install the rear tray on the rear of the printer.
Legal Size
A4 Size
Letter Size
Paper Stopper
When installing directly to the printer
If a duplexer has been installed to the printer
Rear Tray (PT-60)
Rear Tray (PT-4)
To Next Page
Loading...
Need help?
General