Toner Container Replacement
3-2
Toner Container Replacement
The toner container in the printer should be replaced as soon as the
message display shows Toner low or soon after. If you continue to use the
printer, eventually the toner supply will be exhausted at which point the
printer will stop printing and the Replace toner Clean printer
message will be shown instructing you to install a new toner kit.
Toner Container Replacement Interval
Assuming an average toner coverage of 5% and Ecoprint mode turned off,
the toner container will need replacing approximately once every 20,000
pages.
†
†
For a new printer with a toner kit installed for the first time, the
number of copies that can be printed will be approximately 10,000.
Toner Kits to be Used
Contents: Toner container
Waste toner box
Wiper cloth
Grid cleaner
2 plastic bags (for disposal of the old toner container and
waste toner box)
Installation Guide
• Be sure to distance items such as floppy disks during toner container
replacement.
• Be sure to clean the inside of the printer when replacing the toner
container. For details, see Cleaning on page 3-9.
• Use of original Kyocera Mita toner kits is highly recommended to
prevent printer trouble and ensure the long life of the printer.
Note
To Next Page
Loading...
Need help?
General