Pagination
1-44
8
Select On using the or key.
9
Press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
Font
You can select the default font for the current interface. In addition to the
internal fonts, all fonts that are downloaded to the printer memory, or fonts
stored on a CompactFlash card, Microdrive, or option ROM, can be selected
as the default font.
In this menu, you can also set the type and pitch for Courier and Letter
Gothic.
Default font
1
Press the MENU key.
2
Press the or key repeatedly until Font > appears.
3
Press the > key.
4
Press the or key repeatedly until >Font Select > appears.
5
To select an internal font, check that Internal is displayed. If
Internal is not displayed, press the ENTER key. Press the or
key repeatedly until the message display indicates Internal and
press the ENTER key.
To select an option font, press the ENTER key. Press the or key
repeatedly until the message display indicates Option and press the
ENTER key. This operation is possible only when option fonts are
installed in the printer.
>Print KPDL Errs
? On
Font >
>Font Select >
Internal
To Next Page
Loading...
Need help?
General