Name: Kyocera FS-1320D
Brand: Kyocera
Rating: 5 (1 reviews)

To Next Page

To Previous Page

2LY/2LZ

1-2-6

1-2-5 Installing the network interface card (option)

Procedure

1. Turn off printer power switch.

Caution: Do not insert or remove network

interface card while printer power is on.

Doing so may cause damage to the printer

and the network interface card.

2. Open the rear cover.

Figure 1-2-8

3. Remove two screws and then remove the

optional interface slot cover.

4. Insert the network interface card into the

network interface slot. Push it in all the way.

5. Secure the network interface card by using

two screws.

Figure 1-2-9

Rear cover

Screw

Optional interface

slot cover

Network

interface slot

Network interface

card

Questions and Answers:

Need help?

Do you have a question about the Kyocera FS-1320D and is the answer not in the manual?

Kyocera FS-1320D Specifications

General

Print Technology	Laser
Paper Input Capacity	250 sheets
Connectivity	USB 2.0
Memory	32 MB
Warm-up Time	15 seconds or less
Multi-purpose Tray Capacity	50 sheets
Print Speed	20 ppm
Resolution	1200 dpi
Paper Size (Main Tray)	A4, Letter, Legal
Print Media Sizes (Non-standard)	70 x 148 mm to 216 x 356 mm