Kyocera FS-2000D User Manual

Using the Operation Panel
2-80 ADVANCED OPERATION GUIDE
4
Press ? or @ repeatedly until >Sleep
Timer > appears.
5
Press B and display >>Auto Sleep.
6
To set the sleep timer, press [OK]. A
blinking question mark (?) appears.
7
Press ? or @ to change On to Off.
8
Press [OK]. The sleep timer is turned off.
9
To exit the menu selection, press [Menu].
Sleep Timer Timeout Time
You can adjust the length of time the printer waits before entering Auto
Sleep in the absence of data. The default time is 15 minutes.
The printer reverts to normal operation mode when the printer receives a
print job, the operation panel is operated, or one of the exterior covers is
opened.
1
Press [Menu].
2
Press ? or @ repeatedly until Others >
appears.
3
Press B.
4
Press ? or @ repeatedly until >Sleep
Timer > appears.
5
To change the timeout time, press [OK]. A
blinking cursor (_) appears.
>Sleep Timer >
015 min.
>>Auto Sleep
On
>>Auto Sleep
? On
>>Auto Sleep
? Off
Others >
>Sleep Timer >
015min.
>Sleep Timer
015
min.

Kyocera FS-2000D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	64 MB
Maximum internal memory	576 MB
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Media weight (tray 1)	60-120 gsm
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Custom media sizes	148 x 210 mm - 216 x 356 mm
Power requirements	220 - 240 V
Networking features	Ethernet/Fast-Ethernet
Maximum duty cycle	150000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	4 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm