Kyocera FS-2000D User Manual

Using the Operation Panel
2-30 ADVANCED OPERATION GUIDE
Changing the Interface Parameters
This printer is equipped with a parallel interface, a USB interface and a
network interface (FS-3900DN/FS-4000DN). An optional serial interface
and a network interface can be installed. Various printing environment
parameters such as the default emulation can be changed independently
on different interfaces by using the printer’s menu selection system. Select
the interface to apply the changes in the procedure described below.
NOTE: This interface selection described below does not select the
interface from which data will be received. The printer automatically
selects the interface.
Changing Parallel Interface Mode
The parallel interface supports a bi-directional/high-speed mode according
to IEEE standards. Normally, this interface is used under the default setting
Auto. For details, refer to Parallel Interface on page 4-3. After setting the
interface, be sure to reset the printer or turn the power off at least once.
The new setting will be enabled thereafter. You can select from the
following:
• Auto (default)
• Nibble (high)
• High speed
•Normal
1
Press [Menu].
2
Press ? or @ repeatedly until Interface > appears.
3
If the interface is other than parallel, press
[OK]. A blinking question mark (?) appears.
4
Press ? or @ repeatedly until Parallel
appears.
5
Press [OK] again. The question mark disappears.
6
To change the parallel interface mode, press B. The current
communication mode appears.
7
To change the communication mode, press
[OK]. A blinking question mark (?) appears.
Interface
? Serial
Interface
? Parallel
>Parallel I/F
? Nibble (high)

Kyocera FS-2000D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	64 MB
Maximum internal memory	576 MB
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Media weight (tray 1)	60-120 gsm
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Custom media sizes	148 x 210 mm - 216 x 356 mm
Power requirements	220 - 240 V
Networking features	Ethernet/Fast-Ethernet
Maximum duty cycle	150000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	4 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm