Kyocera FS-2000D User Manual

Computer Interface
ADVANCED OPERATION GUIDE 4-5
USB Interface
This printer supports the Hi-Speed USB. USB (Universal Serial Bus)
interface specifications and interface signals are as follows.
Specifications
Basic specification
Complies with the Hi-Speed USB.
Connectors
Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable
Use a shielded cable that complies with USB 2.0 (Hi-Speed USB) and not
longer than 5 meters (16 feet).
Transfer Mode
High speed (480 Mbps maximum)
Power Control
Self-power device
Interface Signals
USB Connector Pin Assignment
Pin Signal Description
1 Vbus Power supply (+5 V)
2 D- Data transmission
3 D+ Data transmission
4 GND Signal ground
Shell — Shield

Kyocera FS-2000D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	64 MB
Maximum internal memory	576 MB
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Media weight (tray 1)	60-120 gsm
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Custom media sizes	148 x 210 mm - 216 x 356 mm
Power requirements	220 - 240 V
Networking features	Ethernet/Fast-Ethernet
Maximum duty cycle	150000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	4 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm