Kyocera FS-2000D User Manual

Using the Operation Panel
2-54 ADVANCED OPERATION GUIDE
Operating the Storage Device
The printer supports four types of storage device; CompactFlash card,
Microdrive, USB flash memory, and RAM disk. The CompactFlash card
and Microdrive are installed into the dedicated slots of the printer. The
RAM disk is an allocated part of the printer’s memory. If the Microdrive is
installed in the printer, the e-MPS function will be available. For details,
refer to e-MPS on page 2-19.
The basic operations of each storage device are the same. This section
explains the operation of the CompactFlash card.
Using the CompactFlash Card
The printer is equipped with a slot for a CompactFlash card. By inserting a
CompactFlash card into the printer, the following operations become
available.
• Reading Font Data
• Reading Data
• Writing Data
• Deleting Data
• Formatting CompactFlash Card
• Printing a List of Data Names
For details about the handling of the memory card, refer to Microdrive
(Hard Disk)/CompactFlash (Memory) Card on page 3-6.
Reading Font Data
If a CompactFlash card with the font data is inserted into the slot when the
printer is turned on, the fonts are automatically read into the printer.
1
Press [Menu].
2
Press ? or @ repeatedly until Memory
Card > appears.
3
Press B.
4
Press ? or @ repeatedly until >Read
Fonts appears.
5
Press [OK]. A question mark (?) appears.
Memory Card >
>Read Fonts
>Read Fonts ?

Kyocera FS-2000D Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Internal memory	64 MB
Maximum internal memory	576 MB
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1100 sheets
Media weight (tray 1)	60-120 gsm
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Custom media sizes	148 x 210 mm - 216 x 356 mm
Power requirements	220 - 240 V
Networking features	Ethernet/Fast-Ethernet
Maximum duty cycle	150000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	9 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	4 W
Certification	TÜV/GS, CE, PTS

Weight and Dimensions

Dimensions (WxDxH)	382 x 394 x 285 mm